core insulation
英 [kɔː(r) ˌɪnsjuˈleɪʃn]
美 [kɔːr ˌɪnsəˈleɪʃn]
网络 心绝缘
双语例句
- Analysis and treatment for core insulation failure in power transformer
电力变压器铁心绝缘故障的诊断及处理 - Numerical Simulation of the Truss Core Panels in Investment and Low Pressure Die Casting The Study on Sound Insulation and Sound Absorption Capacity of Metal Heat Preservation Sandwich Panels
高温合金点阵夹芯板低压熔模铸造数值模拟金属面保温夹芯板的隔声吸声性能的研究 - It is suitable for the non-bearing-force connection of the aerial electric power wore copper conductor or copper core insulation wire.
用于架空电力线路铜绞线或铜芯绝缘线的非承力接续。 - Local Desiccation for Core Insulation of Transformer Based on Short-circuit Reactance Method
基于短路阻抗法的变压器铁芯绝缘现场干燥处理方法 - Ground cable core insulation used with anti-oxidant properties of K-B type low-density polyethylene.
电缆地线芯绝缘采用具有抗氧化性能的K型B类低密度聚乙烯。 - Research on Thermodynamic Characteristic for the Metallic Sandwich Plates with Folded Core; The Study on Sound Insulation and Sound Absorption Capacity of Metal Heat Preservation Sandwich Panels
金属皱褶芯材夹层板的热力学性能研究 - Discussion on Extruded Technology of High Temperature Core Wire with EPDM Insulation
高温芯线乙丙橡胶绝缘层挤出工艺探讨 - Taking DSP as the inside core, backstage software control the act of the protection equipments by the sampling signal which flows from DSP to photoelectrical insulation. Thus the large transformer protection achieves.
整个大型变压器保护系统以DSP为内核，采样信号经DSP判断处理后经过光电隔离输出给保护设备，后台软件控制保护设备动作，从而实现对大型变压器的保护。 - According to the actual magnetostrictive materials and the fiber bragg grating, finished the system designation and optimization, including the core material, the main coil, magnetism loop, heat insulation layer.
结合实际的磁致伸缩材料和光纤光栅，完成装置的机械设计和优化。包括核心材料设计，主线圈设计，磁回路设计，隔热层的设计和优化。 - Presents the computer simulation analysis of the circuit parameter of an actual dry air core reactor run to verify the feasibility of dry air core reactor turn to turn insulation test by impulse voltage.
在介绍脉冲电压法原理的基础上，针对一个实际干式空心电抗器的电路参数进行计算机仿真分析，验证了脉冲电压法对干式空心电抗器进行匝间绝缘检测是可行的。 - Generally, the stator core fault includes loosening of effective laminated core, damage of patch insulation, deflection or drop of end press finger, vibration of core, excessive heat of end, damage of stator core caused by earthing of wingings.
定子铁心故障一般分为有效铁心压装的变松、片间绝缘损坏、铁心端部压指压偏或脱落、铁心振动或噪声超标、端部发热、绕组接地引起的定子铁心损坏等。 - An optimization design method for foil-wound transformers is presented, where the asymmetric core section is designed to adapt for the insulation space between core section and current lead of foil winding.
提出了箔式绕组变压器的一种优化设计方法。 - Two major improving measures were proposed: ( 1) Vacuumizing the core of the bar and filling insulation liquid to displace the air inside completely;
最后提出两方面的主要改进措施：（1）棒芯抽真空，注入绝缘液排尽空气； - This article describes some influence upon insulation test result affected by temperature, voltage increase speed, polarity, and whether iron core is earthed or not during transformer insulation test, and shows the reasons attribute to these influence.
论述变压器绝缘试验中温度、升压速度、极性、铁心是否接地对绝缘试验结果的影响，并分析产生这些影响的原因。 - Core insulation failure in power transformer accounts for quite high proportion among transformer faults.
变压器铁心绝缘故障在变压器故障中占有相当大的比例。 - In view of the problem founded while testing the insulation of iron core in the course of vacuumizing the main transformer in a 220 kV substation, it is proposed that the insulation resistance value can not reflect the real insulating situation during vacuumizing.
就主变抽真空过程中测试铁心绝缘发现的问题，指出在抽真空过程中测出的绝缘数值不能真实反映设备绝缘状况。 - This paper studies the asymmetrical operation mode of split core type controllable reactor, points out the necessity of connecting series neutral reactor, derives the formulae for determining the neutral reactor and the resonance conditions. Finally, the insulation class of neutral reactor is discussed.
研究了裂芯式可控电抗器的不对称运行方式，指出串接中性点小电抗的必要性，推导出小电抗的选择公式和谐振条件，最后讨论了中性点小电抗的绝缘水平。 - Besides the complex plywood to be prepared by polyurethane foam taking as the core layer, and also the test measuring analysis had done for the absorbing and sound insulation.
另外，还制备了以聚氨酯泡沫为芯层的复合板材，并对它们的吸隔声性能进行了测试分析。 - Secondly, it analyzes production flow of transformer, supervision of craft and process, craft quality control and manufacture process of amorphous alloy transformer such as core, armature, insulation parts, transformer case, fuse, and so on.
然后分析了变压器制造工艺流程，工艺和工序的监督以及工艺质量控制，非晶合金变压器制造工艺，即变压器各零部件-铁芯、线圈、绝缘件、器身、引线等的制造工艺。 - And within a 4mm by 4mm area, specific analysis is performed in two aspects from material characteristics to geometrical parameters, and in four parts that are coil, magnetic core, insulation material and substrate.
在4mm×4mm外形面积下，从材料性质和几何参数两个方面，磁芯、线圈、绝缘材料和衬底四个部分研究和分析各种相关参数对微电感的性能影响，并提出了优化设计方案。 - After analyzing the weakness of current cable monitoring device, a solution which uses computer software as a core and considering the measurement of both insulation and optical transmission performance is presented.
论文指出了当前海缆监测设备的不足，提出了以计算机软件为核心，能同时进行绝缘性能和光传输性能测试的解决方案。 - Analysis on electric field intensity distribution in air core reactor insulation can contribute to air core reactor insulation rational design.
深入分析空心电抗器绝缘的电场强度分布情况，有助于空心电抗器绝缘的合理设计。 - The core of RVM is applying direct current voltage to transformer insulation system to gain wave spectrogram of transformer recovery voltage and evaluate the insulation state of transformer.
该评判方法的核心思想是对变压器绝缘系统施加直流电压，得到变压器绝缘系统时域响应的回复电压波谱图，以此对变压器的绝缘状态作出评估。 - Power transformer, as the core of power transmission and distribution, is one of the pivotal equipments in power system, also the most expensive and complex one. Its insulation state has direct bearing on the security and stability of grid operation.
电力变压器作为电力传输和分配的核心和枢纽，是电网中关键的设备之一，是电力系统中最为昂贵和复杂的设备，其良好的绝缘状态直接关系到电网安全、稳定、可靠运行。